TPS3808G18QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G18 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 2.7μA |
| Adjustable Threshold | YES |
| Quiescent Current | 2.4μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.67V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 1.66V |
| Max Reset Threshold Voltage | 1.678V |
| Threshold Voltage | 1.67V |
| Undervoltage Threshold | 1.66V |
| Overvoltage Threshold | 1.678V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3808G18QDBVRQ1 Overview
A total of 6 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. There are 1 channels available on this supervisor, and each channel has a different function. Please find attached SOT-23-6 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. IC management conducts in a 3.3V-voltage supply. IC management is possible to find a succession of 1 voltages that have been checked. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 6 pins. 6 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.8V volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. During operation, this power management system outputs Open Drain or Open Collector. Supplied with a operating current of 2.7μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using TPS3808G18, the base power ics number. The IC power comes from the well-known Automotive, AEC-Q100 series.
TPS3808G18QDBVRQ1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.8V
2.7μA operating supply current
TPS3808G18QDBVRQ1 Applications
There are a lot of Texas Instruments TPS3808G18QDBVRQ1 Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Satellite navigation
- Insulation fault location system
- Detection of phase loss
- Battery-powered equipment
- Urban rail transit weak current power monitoring
- Important electronics for automotive safety
- Radio
- Digitally controlled LDO regulators circuit
- WiFi router
