TPS3808G19DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G19 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.7μA |
| Nominal Supply Current | 2.4μA |
| Adjustable Threshold | NO |
| Quiescent Current | 2.4μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.77V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Min Reset Threshold Voltage | 1.761V |
| Max Reset Threshold Voltage | 1.779V |
| Threshold Voltage | +1.77V |
| Undervoltage Threshold | 1.761V |
| Overvoltage Threshold | 1.779V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3808G19DBVT Overview
As you can see, this power management is mounted through 6 terminals. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3.3V supply voltages. Power ics operate at 1 supply voltages. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 6 pins on IC management. This power management has 6 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.65V volts. The supply voltage (Vsup) should not exceed 6.5V volts in this IC power. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 2.7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3808G19, which is the base power ics number.
TPS3808G19DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.7μA operating supply current
TPS3808G19DBVT Applications
There are a lot of Texas Instruments TPS3808G19DBVT Voltage Supervisors applications.
- Medical-specific insulation monitor
- Battery-powered equipment
- Radio
- Magnetic resonance imaging
- Network equipment
- Important electronics for automotive protection
- Battery cars
- Leakage current detection
- Computer applications
- Power distribution systems of infant care room
