TPS3808G25DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DETECTOR THRESHOLD VOLTAGE IS 2.33V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G25 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Operating Supply Voltage | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.4μA |
| Nominal Supply Current | 2.7μA |
| Adjustable Threshold | NO |
| Quiescent Current | 2.4μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.0057mA |
| Min Reset Threshold Voltage | 2.3183V |
| Max Reset Threshold Voltage | 2.341V |
| Threshold Voltage | +2.33V |
| Undervoltage Threshold | 2.33V |
| Overvoltage Threshold | 2.341V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3808G25DBVR Overview
It is mounted through 6 terminals on the power management. There is a Cut Tape (CT)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes SOT-23-6 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 3.3V volt supply. Power management conducts at a voltage of 1. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 6. Pin count of the power management is 6. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.65V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.5V volts. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~125°C TJ . The output voltage of this power managment ic during operation is Open Drain or Open Collector. For this power management, there is an 2.4μA volt supply current. Supervisors are also additional features, such as [0] for example, which are worth mentioning. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3808G25, which is the base power ics number.
TPS3808G25DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current
TPS3808G25DBVR Applications
There are a lot of Texas Instruments TPS3808G25DBVR Voltage Supervisors applications.
- Set top box
- Urban rail transit weak current power monitoring
- Utility meter
- Precision measurement
- Consumer electronics
- Important electronics for automotive safety
- Medical-specific isolation transformer
- Power distribution systems of CCU
- Leakage current detection
- Personal computers
