TPS3808G30DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DETECTOR THRESHOLD VOLTAGE IS 2.79V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G30 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.4μA |
| Nominal Supply Current | 2.7μA |
| Adjustable Threshold | NO |
| Quiescent Current | 2.4μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.0057mA |
| Min Reset Threshold Voltage | 2.776V |
| Max Reset Threshold Voltage | 2.803V |
| Threshold Voltage | +2.79 |
| Undervoltage Threshold | 2.79V |
| Overvoltage Threshold | 2.803V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3808G30DBVR Overview
It is mounted through 6 terminals on the power management. Packaged in the form of a Cut Tape (CT), power management is easy to use. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SOT-23-6 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. This power ic can be sub-categorized as Power Management Circuits. A total of 6 pins are located on this power management. This power management has 6 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.65V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.5V volts. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 2.4μA is the recommended value. Among other features, IC power can be also taken advantage of [0], for instance. You can always use TPS3808G30, the base supervisor number, to search for similar PMICs of the manufacturer.
TPS3808G30DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current
TPS3808G30DBVR Applications
There are a lot of Texas Instruments TPS3808G30DBVR Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Detection of phase loss
- Battery cars
- DC stabilized power supply module
- Household appliances
- Transformer load monitoring equipment
- Analog circuit
- Detection of phase sequence
- Military communications
- Power distribution systems of infant care room
