TPS3808G30DBVT
| Parameters | |
|---|---|
| Supply Current-Max (Isup) | 0.0057mA |
| Min Reset Threshold Voltage | 2.776V |
| Max Reset Threshold Voltage | 2.803V |
| Threshold Voltage | +2.79 |
| Undervoltage Threshold | 2.79V |
| Overvoltage Threshold | 2.803V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DETECTOR THRESHOLD VOLTAGE IS 2.79V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G30 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.4μA |
| Nominal Supply Current | 2.7μA |
| Adjustable Threshold | NO |
| Quiescent Current | 2.4μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
TPS3808G30DBVT Overview
Power management is mounted through 6 terminals. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes SOT-23-6 functions for your convenience. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. IC management conducts in a 3.3V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 6 pins on the board. The pins of the power management system count 6. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.65V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 6.5V volts in this IC power. The recommended mounting type is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supervisor's supply current is specified to 2.4μA. In addition, IC management are other features such as [0], to mention only a few. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3808G30, which is the base power ics number.
TPS3808G30DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current
TPS3808G30DBVT Applications
There are a lot of Texas Instruments TPS3808G30DBVT Voltage Supervisors applications.
- Utility meter
- Power communication system
- Battery cars
- Cloud computing
- Multi-voltage system
- Military communications
- Solar power charger
- Consumer electronics
- Rechargeable batteries
- Electronics installed in the vehicle
