TPS3808G33DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DETECTOR THRESHOLD VOLTAGE IS 3.07V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G33 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.4μA |
| Nominal Supply Current | 2.7μA |
| Adjustable Threshold | NO |
| Quiescent Current | 2.4μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.0057mA |
| Min Reset Threshold Voltage | 3.0546V |
| Max Reset Threshold Voltage | 3.0853V |
| Threshold Voltage | +3.07V |
| Undervoltage Threshold | 3.07V |
| Overvoltage Threshold | 3.0853V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3808G33DBVRG4 Overview
This power management consists of 6 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. IC management is packaged as a SOT-23-6 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 6. The pins of the power management system count 6. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.65V. The maximum supply voltage (Vsup) is not to exceed 6.5V volts in this IC management. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There is a 2.4μA supply current present in the power management. Power management is also possible to add other features such as DETECTOR THRESHOLD VOLTAGE IS 3.07V to name a few. You can always use TPS3808G33, the base supervisor number, to search for similar PMICs of the manufacturer.
TPS3808G33DBVRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current
TPS3808G33DBVRG4 Applications
There are a lot of Texas Instruments TPS3808G33DBVRG4 Voltage Supervisors applications.
- DVR
- Microcontroller system
- Fire equipment power monitoring system
- Medical-specific insulation monitor
- Automotive permanent magnet synchronous motors
- Set top box
- Utility meter
- Low voltage/high power - AI, GPU
- Kitchen appliances
- Detection of phase loss
