TPS3808G50DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3808G50 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Max Output Current | 0A |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 2.4μA |
| Nominal Supply Current | 2.7μA |
| Adjustable Threshold | NO |
| Quiescent Current | 2.4μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.0057mA |
| Min Reset Threshold Voltage | 4.6267V |
| Max Reset Threshold Voltage | 4.6732V |
| Threshold Voltage | +4.65V |
| Undervoltage Threshold | 4.65V |
| Overvoltage Threshold | 4.6732V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3808G50DBVT Overview
There are 6 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find SOT-23-6 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. There is a subcategory of this power ic known as Power Management Circuits. A total of 6 pins are located on this power management. There are 6 pins on the supervisor. IC management can only work with a supply voltage of 1.65V volts. There should be no more than 6.5V volts of supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~125°C TJ. The output voltage of this power managment ic during operation is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 2.4μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using TPS3808G50, the base power ics number.
TPS3808G50DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.65V
2.4μA operating supply current
TPS3808G50DBVT Applications
There are a lot of Texas Instruments TPS3808G50DBVT Voltage Supervisors applications.
- Functional modules
- Transformer load monitoring equipment
- External alarm
- Urban rail transit weak current power monitoring
- Military electronics
- Radar
- Rechargeable batteries
- Automotive power systems
- Refrigeration
- Radio
