Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
TO-236-3, SC-59, SOT-23-3 |
Number of Pins |
3 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
3 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
437mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.95mm |
Base Part Number |
TPS3809K33 |
Output |
Push-Pull, Totem Pole |
Pin Count |
3 |
Output Voltage |
7V |
Operating Supply Voltage |
3.3V |
Number of Channels |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
9μA |
Nominal Supply Current |
20μA |
Power Dissipation |
437mW |
Output Current |
20mA |
Max Supply Current |
25μA |
Adjustable Threshold |
NO |
Quiescent Current |
9μA |
Reset |
Active Low |
Number of Voltages Monitored |
1 |
Reset Timeout |
120ms Minimum |
Min Reset Threshold Voltage |
2.87V |
Max Reset Threshold Voltage |
2.99V |
Threshold Voltage |
+2.93V |
Undervoltage Threshold |
2.93V |
Overvoltage Threshold |
2.99V |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS3809K33DBVR Overview
Power management is mounted through 3 terminals. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. This power management is made up of 1 channels which are available in a series format. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 3.3V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The power management is mounted by a Surface Mount-axis. This power ic can be sub-categorized as Power Management Circuits. The total number of pins on this power management is 3. Power managment ic pin count is 3. A voltage (Vsup) that doesn't fall below 2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Surface Mount mounting is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 9μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3809K33, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 25μA.
TPS3809K33DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TPS3809K33DBVR Applications
There are a lot of Texas Instruments TPS3809K33DBVR Voltage Supervisors applications.
- Automotive power systems
- Cloud computing
- Detection of phase loss
- Detection of phase imbalance
- Low voltage/high power - AI, GPU
- Functional modules
- Insulation fault location system
- Electronics installed in the vehicle
- Power communication system
- Utility meter