TPS3809K33QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3809K33 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 437mW |
| Max Supply Current | 30μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.87V |
| Max Reset Threshold Voltage | 2.99V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.99V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3809K33QDBVRQ1 Overview
This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. It is packaged with Cut Tape (CT). Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. IC management is packaged as a TO-236-3, SC-59, SOT-23-3 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 3.3V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 3 pins that are attached to IC management. There are 3 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 9μA. To find similar IC managements from the manufacturer, you can always search by TPS3809K33. A maximum supply temperature of 30μA can be used with this power management. A PMIC from the well-known Automotive, AEC-Q100 series of products is being offered here.
TPS3809K33QDBVRQ1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TPS3809K33QDBVRQ1 Applications
There are a lot of Texas Instruments TPS3809K33QDBVRQ1 Voltage Supervisors applications.
- Electric heating appliances
- Functional modules
- Power communication system
- Solar power charger
- Automotive power systems
- Insulation fault location system
- Microcontroller system
- Set top box
- Utility meter
- Linux and server computing
