banner_page

TPS3809L30DBVR

3V3 Terminals 3-Pin TPS3809L30 Voltage supervisor1 Channels Min 2V Max 6V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3809L30DBVR
  • Package: TO-236-3, SC-59, SOT-23-3
  • Datasheet: -
  • Stock: 571
  • Description: 3V3 Terminals 3-Pin TPS3809L30 Voltage supervisor1 Channels Min 2V Max 6V (Kg)

Details

Tags

Parameters
Width 1.6mm
Thickness 1.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case TO-236-3, SC-59, SOT-23-3
Number of Pins 3
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 3
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature RESET THRESHOLD VOLTAGE IS 2.64V
Subcategory Power Management Circuits
Max Power Dissipation 437mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Terminal Pitch 0.95mm
Base Part Number TPS3809L30
Output Push-Pull, Totem Pole
Pin Count 3
Operating Supply Voltage 3V
Number of Channels 1
Max Supply Voltage 6V
Min Supply Voltage 2V
Operating Supply Current 9μA
Nominal Supply Current 25μA
Power Dissipation 437mW
Max Supply Current 25μA
Adjustable Threshold NO
Quiescent Current 9μA
Reset Active Low
Number of Voltages Monitored 1
Reset Timeout 120ms Minimum
Min Reset Threshold Voltage 2.58V
Max Reset Threshold Voltage 2.7V
Threshold Voltage +2.64V
Undervoltage Threshold 2.64V
Overvoltage Threshold 2.7V
Height 1.45mm
Length 2.9mm

TPS3809L30DBVR Overview


This power management consists of 3 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 3V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 3 pins on the board. The pins of the power management system count 3. IC management can only work with a supply voltage of 2V volts. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a supply current of 9μA for the power management. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to TPS3809L30, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 25μA.

TPS3809L30DBVR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current

TPS3809L30DBVR Applications


There are a lot of Texas Instruments TPS3809L30DBVR Voltage Supervisors applications.

  • Magnetic resonance imaging
  • Sensitive sensors
  • Smartphones
  • Precision measurement
  • Network equipment
  • Set top box
  • Electronics installed in the vehicle
  • Solar power charger
  • FPGA design
  • Battery cars

Write a review

Note: HTML is not translated!
    Bad           Good