TPS3809L30QDBVRQ1
| Parameters | |
|---|---|
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.64V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3809L30 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 437mW |
| Max Supply Current | 30μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.58V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | +2.64V |
| Undervoltage Threshold | 2.64V |
| Overvoltage Threshold | 2.7V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
TPS3809L30QDBVRQ1 Overview
There are 3 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Cut Tape (CT) way. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 3 pins on power management. This power management has 3 pins. Supply voltage (Vsup) should be at least 2V for this power management. The supply voltage (Vsup) should not exceed 6V volts in this IC power. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. The supervisor's supply current is specified to 9μA. There are also other features in the software such as [0], just to mention a few. You can always use TPS3809L30, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 30μA can be used. The PMIC is a kind of the well-known Automotive, AEC-Q100 series of products.
TPS3809L30QDBVRQ1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TPS3809L30QDBVRQ1 Applications
There are a lot of Texas Instruments TPS3809L30QDBVRQ1 Voltage Supervisors applications.
- DVR
- Utility meter
- Embedded computing
- Insulation fault location system
- Medical-specific isolation transformer
- Power communication system
- Digitally controlled LDO regulators circuit
- Consumer electronics
- Power distribution systems of CCU
- Personal computers
