TPS3813I50QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3813I50 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 4.55V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 20ms Minimum |
| Min Reset Threshold Voltage | 4.45V |
| Max Reset Threshold Voltage | 4.65V |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.45V |
| Overvoltage Threshold | 4.65V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3813I50QDBVRQ1 Overview
It is mounted through 6 terminals on the power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SOT-23-6 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. When 5V is applied to the power ic, it conducts. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. There are a total of 6 pins on power management. 6 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 25μA volt supply current. You can always use TPS3813I50, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 25μA can be used. The IC power that you are looking at comes from our well-known Automotive, AEC-Q100 series product line.
TPS3813I50QDBVRQ1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
25μA operating supply current
TPS3813I50QDBVRQ1 Applications
There are a lot of Texas Instruments TPS3813I50QDBVRQ1 Voltage Supervisors applications.
- Precision measurement
- Computer applications
- Detection of phase imbalance
- Power distribution systems of operating room
- Network equipment
- Telecommunications equipment
- Rechargeable batteries
- DSP
- Important electronics for automotive safety
- Important electronics for automotive protection
