TPS3813K33DBVRG4
| Parameters | |
|---|---|
| Number of Voltages Monitored | 1 |
| Reset Timeout | 20ms Minimum |
| Min Reset Threshold Voltage | 2.87V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 2.93V; POWER ON RESET GENERATOR |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3813K33 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
TPS3813K33DBVRG4 Overview
As you can see, this power management is mounted through 6 terminals. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3.3V supply voltages. Power ics operate at 1 supply voltages. This power ic can be sub-categorized as Power Management Circuits. In total, it has 6 pins on IC management. 6 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 2V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 9μA volt supply current. Supervisors are also additional features, such as [0] for example, which are worth mentioning. It is always advisable to use TPS3813K33, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 25μA can be used with this power management.
TPS3813K33DBVRG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TPS3813K33DBVRG4 Applications
There are a lot of Texas Instruments TPS3813K33DBVRG4 Voltage Supervisors applications.
- Satellite navigation
- Insulation fault location system
- Important electronics for automotive safety
- Utility meter
- Important electronics for automotive protection
- Computer applications
- Microcontroller system
- Multi-voltage system
- Power distribution systems of operating room
- WiFi router
