TPS3813K33MDBVREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3813K33 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 25μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 20ms Minimum |
| Min Reset Threshold Voltage | 2.87V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | 2.93 |
| Undervoltage Threshold | 2.87V |
| Overvoltage Threshold | 3V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3813K33MDBVREP Overview
Power management is mounted through 6 terminals. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. For your reference, this PMIC includes a list of SOT-23-6 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. IC management is possible to find a succession of 1 voltages that have been checked. There is a subcategory of this power ic known as Power Management Circuits. Power management has a total of 6 pins. The pins of the power management system count 6. A voltage (Vsup) that doesn't fall below 2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 6V volts in this IC power. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -55°C~125°C TA . Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 25μA, this PMIC is capable of fully function as specified. You can always use TPS3813K33, the base supervisor number, to search for similar PMICs of the manufacturer. At most, voltage supervisor can operate at a supply temperature of 25μA.
TPS3813K33MDBVREP Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
25μA operating supply current
TPS3813K33MDBVREP Applications
There are a lot of Texas Instruments TPS3813K33MDBVREP Voltage Supervisors applications.
- Microcontroller system
- Refrigeration
- Leakage protection
- Detection of phase imbalance
- Solar power charger
- Precision measurement
- Analog circuit
- Radar
- Unattended substation automation
- Digitally controlled LDO regulators circuit
