TPS3820-33DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.93V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3820 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 15ms Minimum |
| Min Reset Threshold Voltage | 2.86V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | 2.93 |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3820-33DBVR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 3.3V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. This power ic can be sub-categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. There are 5 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 15μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use TPS3820, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature that PMIC chip can work with is 25μA.
TPS3820-33DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
TPS3820-33DBVR Applications
There are a lot of Texas Instruments TPS3820-33DBVR Voltage Supervisors applications.
- Precision measurement
- Personal computers
- emergency room
- Electric heating appliances
- Multi-voltage system
- Radar
- Fire equipment power monitoring system
- Smart meter
- Battery cars
- DC stabilized power supply module
