TPS3820-33DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.93V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Current Rating | 25A |
| Base Part Number | TPS3820 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Output Voltage | 4.55V |
| Max Output Current | 5mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 15ms Minimum |
| Min Reset Threshold Voltage | 2.86V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | 2.93 |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3820-33DBVT Overview
Power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. When 1 is applied to the power ic, it conducts. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. 5 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use TPS3820, the base supervisor number, to search for similar PMICs of the manufacturer. The power management can work with a maximum supply temperature of 25μA. An 25A-current rating is given for the IC power.
TPS3820-33DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
Current rating of 25A
TPS3820-33DBVT Applications
There are a lot of Texas Instruments TPS3820-33DBVT Voltage Supervisors applications.
- DSP
- Dash board
- Embedded computing
- Efficient information transmission
- Electronics installed in the vehicle
- Computer applications
- Detection of phase sequence
- Rechargeable batteries
- Radar
- Power communication system
