banner_page

TPS3823-50DBVR

5V5 Terminals 5-Pin TPS3823 Voltage supervisor1 Channels Min 1.1V Max 5.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3823-50DBVR
  • Package: SC-74A, SOT-753
  • Datasheet: -
  • Stock: 745
  • Description: 5V5 Terminals 5-Pin TPS3823 Voltage supervisor1 Channels Min 1.1V Max 5.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Max Power Dissipation 437mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TPS3823
Output Push-Pull, Totem Pole
Pin Count 5
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1.1V
Operating Supply Current 15μA
Nominal Supply Current 25μA
Power Dissipation 437mW
Output Current 10mA
Max Supply Current 25μA
Adjustable Threshold NO
Quiescent Current 15μA
Watchdog Timer Yes
Reset Active Low
Number of Voltages Monitored 1
Reset Timeout 120ms Minimum
Min Reset Threshold Voltage 4.46V
Max Reset Threshold Voltage 4.64V
Threshold Voltage +4.55V
Undervoltage Threshold 4.55V
Overvoltage Threshold 4.64V
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS3823-50DBVR Overview


A total of 5 terminals are used to mount this power management. In terms of packaging, power management follows the Tape & Reel (TR) model. There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-74A, SOT-753 package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 5V. IC management is possible to find a succession of 1 voltages that have been checked. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 5 pins are located on this power management. This power management has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The power management's supply current is 15μA. It is always advisable to use TPS3823, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 25μA.

TPS3823-50DBVR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current

TPS3823-50DBVR Applications


There are a lot of Texas Instruments TPS3823-50DBVR Voltage Supervisors applications.

  • Multi-voltage system
  • Power distribution systems of operating room
  • Embedded computing
  • Battery cars
  • Power communication system
  • Solar power charger
  • Battery cars
  • Precision measurement
  • Radar
  • Microprocessor system

Write a review

Note: HTML is not translated!
    Bad           Good