TPS3824-25DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3824 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.2V |
| Max Reset Threshold Voltage | 2.3V |
| Threshold Voltage | +2.25V |
| Undervoltage Threshold | 2.25V |
| Overvoltage Threshold | 2.3V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3824-25DBVR Overview
A total of 5 terminals are used to mount this power management. A Cut Tape (CT) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. In a 3.3V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 5 pins on IC management. This power management has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. The supply current of the power management is 15μA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3824, which is the base power ics number. The power management can work with a maximum supply temperature of 25μA.
TPS3824-25DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
TPS3824-25DBVR Applications
There are a lot of Texas Instruments TPS3824-25DBVR Voltage Supervisors applications.
- Display equipment
- Electric heating appliances
- Consumer electronics
- Personal computers
- Sensitive sensors
- Unattended substation automation
- Detection of phase sequence
- Power distribution systems of operating room
- Leakage protection
- Kitchen appliances
