TPS3824-33DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.93V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3824 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.86V |
| Max Reset Threshold Voltage | 3V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3824-33DBVT Overview
There are 5 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. Manage ics operate at 3.3V supply voltages. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. A total of 5 pins are located on this power management. 5 pins are present on the power management system. Supply voltage (Vsup) should be at least 1.1V for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 15μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use TPS3824, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 25μA can be used.
TPS3824-33DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
TPS3824-33DBVT Applications
There are a lot of Texas Instruments TPS3824-33DBVT Voltage Supervisors applications.
- Leakage protection
- Display equipment
- WiFi router
- Leakage current detection
- Computer applications
- DC stabilized power supply module
- Power distribution systems of CCU
- Satellite navigation
- Automotive permanent magnet synchronous motors
- Automotive power systems
