TPS3824-50DBVTG4
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3824 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 5mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Watchdog Timer | Yes |
| Reset | Active High/Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 4.46V |
| Max Reset Threshold Voltage | 4.64V |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.64V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
TPS3824-50DBVTG4 Overview
This power management consists of 5 mounting terminals on which it can be mounted. In terms of packaging, power management follows the Tape & Reel (TR) model. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. A total of 5 pins are located on this power management. This power management system has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to TPS3824, the base PMIC number. The maximum supply temperature is 25μA.
TPS3824-50DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
TPS3824-50DBVTG4 Applications
There are a lot of Texas Instruments TPS3824-50DBVTG4 Voltage Supervisors applications.
- Cloud computing
- Unattended substation automation
- Power distribution systems of infant care room
- Smart meter
- Efficient information transmission
- DVR
- Military communications
- Medical-specific insulation monitor
- Computer applications
- Embedded computing
