TPS3825-50DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS3825 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 5mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.1V |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 15μA |
| Reset | Active High |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 4.46V |
| Max Reset Threshold Voltage | 4.64V |
| Threshold Voltage | +4.55V |
| Undervoltage Threshold | 4.55V |
| Overvoltage Threshold | 4.64V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3825-50DBVT Overview
There are 5 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. Manage ics operate at 3.3V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. There are a total of 5 pins on power management. The pins of the power management system count 5. Supply voltage (Vsup) should be at least 1.1V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The power management's supply current is 15μA. A similar IC managements number of the manufacturer can always be found by using TPS3825, the base power ics number. The maximum supply temperature voltage supervisor can handle is 25μA.
TPS3825-50DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
TPS3825-50DBVT Applications
There are a lot of Texas Instruments TPS3825-50DBVT Voltage Supervisors applications.
- Battery cars
- Efficient information transmission
- Data storage applications
- Display equipment
- Analog circuit
- Important electronics for automotive safety
- Household appliances
- Embedded computing
- FPGA design
- emergency room
