TPS3831G18DQNT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XDFN Exposed Pad |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3831G18 |
| Output | Push-Pull, Totem Pole |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 600mV |
| Operating Supply Current | 150nA |
| Max Supply Current | 500nA |
| Adjustable Threshold | NO |
| Quiescent Current | 150nA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.67V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 1.628V |
| Max Reset Threshold Voltage | 1.695V |
| Threshold Voltage | +1.67V |
| Reset Delay Time | 200 ms |
| Height | 400μm |
| Length | 1mm |
| Width | 1mm |
| Thickness | 370μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3831G18DQNT Overview
This power management consists of 4 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 1 channels, each of which can be used independently. There are 4-XDFN Exposed Pad functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The package peak reflow temperature is specified to be 260. Power ics operate at 1 supply voltages. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. Pin count of the power management is 4. IC management can only work with a supply voltage of 600mV volts. The supply voltage (Vsup) should not exceed 6.5V volts in this IC power. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The power management's supply current is 150nA. You can always use TPS3831G18, the base supervisor number, to search for similar PMICs of the manufacturer. Voltage supervisor can work with a supply temperature of 500nA at the most.
TPS3831G18DQNT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 600mV
150nA operating supply current
TPS3831G18DQNT Applications
There are a lot of Texas Instruments TPS3831G18DQNT Voltage Supervisors applications.
- DVR
- Embedded computing
- DSP
- Telecommunications equipment
- Display equipment
- Utility meter
- Analog circuit
- Magnetic resonance imaging
- Consumer electronics
- Multi-voltage system
