TPS3836L30DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.64V |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS3836L30 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 250nA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 437mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10ms Minimum |
| Min Reset Threshold Voltage | 2.56V |
| Max Reset Threshold Voltage | 2.69V |
| Undervoltage Threshold | 2.64V |
| Overvoltage Threshold | 2.69V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3836L30DBVT Overview
There are 5 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Cut Tape (CT). As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 1.8V volt supply. In a 1 supply voltage, the PMIC chip conducts. The mount is provided by Surface Mount. In total, it has 5 pins on IC management. There are 5 pins on the power managment ic. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.6V. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 250nA supply current present in the power management. Among other features, IC power can be also taken advantage of [0], for instance. To find similar IC managements from the manufacturer, you can always search by TPS3836L30. The maximum supply temperature that PMIC chip can work with is 15μA.
TPS3836L30DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3836L30DBVT Applications
There are a lot of Texas Instruments TPS3836L30DBVT Voltage Supervisors applications.
- Low voltage/high power - AI, GPU
- Power communication system
- Power distribution systems of ICU
- Efficient information transmission
- Personal computers
- Magnetic resonance imaging
- Data storage applications
- Radio
- Smartphones
- Solar power charger
