TPS3836L30DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.64V |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS3836L30 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 250nA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 437mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10ms Minimum |
| Min Reset Threshold Voltage | 2.56V |
| Max Reset Threshold Voltage | 2.69V |
| Undervoltage Threshold | 2.64V |
| Overvoltage Threshold | 2.69V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3836L30DBVTG4 Overview
A total of 5 terminals are used to mount this power management. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 1.8V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Surface Mount. In total, IC powers are 5 pins on the board. This power management system has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.6V. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. The mounting type of the supervisors is Surface MountIt is recommended that the supervisor be set to this temperature: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 250nA for the power management. Supervisors are also additional features, such as [0] for example, which are worth mentioning. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3836L30, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 15μA.
TPS3836L30DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3836L30DBVTG4 Applications
There are a lot of Texas Instruments TPS3836L30DBVTG4 Voltage Supervisors applications.
- Unattended substation automation
- Military electronics
- Stable power system
- Important electronics for automotive protection
- Cloud computing
- Power distribution systems of infant care room
- Household appliances
- Automotive permanent magnet synchronous motors
- Power distribution systems of ICU
- Sensitive sensors
