banner_page

TPS3837E18DBVT

1.8V5 Terminals 5-Pin TPS3837E18 Voltage supervisor1 Channels Min 1.6V Max 6V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3837E18DBVT
  • Package: SC-74A, SOT-753
  • Datasheet: -
  • Stock: 348
  • Description: 1.8V5 Terminals 5-Pin TPS3837E18 Voltage supervisor1 Channels Min 1.6V Max 6V (Kg)

Details

Tags

Parameters
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
JESD-609 Code e4
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 437mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Base Part Number TPS3837E18
Output Push-Pull, Totem Pole
Pin Count 5
Operating Supply Voltage 1.8V
Number of Channels 1
Max Supply Voltage 6V
Min Supply Voltage 1.6V
Operating Supply Current 250nA
Nominal Supply Current 15μA
Power Dissipation 437mW
Max Supply Current 15μA
Adjustable Threshold NO
Quiescent Current 220nA
Watchdog Timer No
Reset Active High
Number of Voltages Monitored 1
Reset Timeout 10ms Minimum
Min Reset Threshold Voltage 1.66V
Max Reset Threshold Voltage 1.74V
Undervoltage Threshold 1.71V
Overvoltage Threshold 1.74V
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS3837E18DBVT Overview


This power management consists of 5 mounting terminals on which it can be mounted. Packaging is in the form of a Cut Tape (CT). The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. When 1.8V is applied to the power ic, it conducts. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. The total number of pins on this power management is 5. The pins of the power management system count 5. It is recommended that Vsup should not be less than 1.6V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 250nA. To find similar IC managements from the manufacturer, you can always search by TPS3837E18. A maximum supply temperature of 15μA can be used.

TPS3837E18DBVT Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current

TPS3837E18DBVT Applications


There are a lot of Texas Instruments TPS3837E18DBVT Voltage Supervisors applications.

  • Magnetic resonance imaging
  • Microcontroller system
  • Important electronics for automotive safety
  • FPGA design
  • Military electronics
  • Kitchen appliances
  • Fire equipment power monitoring system
  • Urban rail transit weak current power monitoring
  • Insulation fault location system
  • Solar power charger

Write a review

Note: HTML is not translated!
    Bad           Good