TPS3837E18QDBVRQ1
| Parameters | |
|---|---|
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS3837E18 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 250nA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Watchdog Timer | No |
| Reset | Active High |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10ms Minimum |
| Threshold Voltage | +1.71V |
| Undervoltage Threshold | 1.71V |
| Overvoltage Threshold | 1.76V |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
TPS3837E18QDBVRQ1 Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaging is in the form of a Cut Tape (CT). Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. When a supply voltage of 1.8V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 5 pins are located on this power management. There are 5 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 1.6V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 6V volts in this IC power. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~125°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 250nA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3837E18, which is the base power ics number. The IC power that you are looking at comes from our well-known Automotive, AEC-Q100 series product line.
TPS3837E18QDBVRQ1 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3837E18QDBVRQ1 Applications
There are a lot of Texas Instruments TPS3837E18QDBVRQ1 Voltage Supervisors applications.
- Personal computers
- Leakage protection
- Stable power system
- Power distribution systems of ICU
- Power communication system
- Leakage current detection
- Display equipment
- Smart meter
- Precision measurement
- Power distribution systems of CCU
