TPS3837K33DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.93V |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS3837K33 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 250nA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 437mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Reset | Active High |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10ms Minimum |
| Min Reset Threshold Voltage | 2.84V |
| Max Reset Threshold Voltage | 2.99V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.99V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3837K33DBVTG4 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 1.8V volt supply. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. Power management has a total of 5 pins. Power managment ic pin count is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.6V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The supervisor's supply current is specified to 250nA. Among other features, IC power can be also taken advantage of [0], for instance. A similar IC managements number of the manufacturer can always be found by using TPS3837K33, the base power ics number. A maximum supply temperature of 15μA can be used with this power management.
TPS3837K33DBVTG4 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3837K33DBVTG4 Applications
There are a lot of Texas Instruments TPS3837K33DBVTG4 Voltage Supervisors applications.
- Detection of phase loss
- Stable power system
- Radio
- Power distribution systems of operating room
- Refrigeration
- WiFi router
- Microprocessor system
- DVR
- Set top box
- Medical-specific insulation monitor
