TPS3837L30DBVR
| Parameters | |
|---|---|
| Max Reset Threshold Voltage | 2.69V |
| Undervoltage Threshold | 2.64V |
| Overvoltage Threshold | 2.69V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.64V |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS3837L30 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 250nA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 437mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Reset | Active High |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10ms Minimum |
| Min Reset Threshold Voltage | 2.56V |
TPS3837L30DBVR Overview
This power management consists of 5 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 1.8V supply voltages. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. In total, IC powers are 5 pins on the board. This power management has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.6V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 250nA volt supply current. In addition, IC management are other features such as [0], to mention only a few. To find similar IC managements from the manufacturer, you can always search by TPS3837L30. The power management can work with a maximum supply temperature of 15μA.
TPS3837L30DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3837L30DBVR Applications
There are a lot of Texas Instruments TPS3837L30DBVR Voltage Supervisors applications.
- Smart meter
- Telecommunications equipment
- Detection of phase imbalance
- Low voltage/high power - AI, GPU
- Battery cars
- Battery-powered equipment
- Kitchen appliances
- Electric heating appliances
- Military communications
- Military electronics
