TPS3837L30DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.64V |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS3837L30 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 5mA |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 250nA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 437mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Reset | Active High |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10ms Minimum |
| Min Reset Threshold Voltage | 2.56V |
| Max Reset Threshold Voltage | 2.69V |
| Undervoltage Threshold | 2.64V |
| Overvoltage Threshold | 2.69V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3837L30DBVT Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. There is a Cut Tape (CT)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. The package peak reflow temperature is specified to be 260. When 1.8V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. By Surface Mount, IC management has been mounted. Taking into account all of the pins, this power management has a total of 5. This power management system has 5 pins. IC management can only work with a supply voltage of 1.6V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The power management's supply current is 250nA. The other features include, for example, [0], which is just one example. A similar IC managements number of the manufacturer can always be found by using TPS3837L30, the base power ics number. The maximum supply temperature is 15μA.
TPS3837L30DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3837L30DBVT Applications
There are a lot of Texas Instruments TPS3837L30DBVT Voltage Supervisors applications.
- Precision measurement
- DSP
- External alarm
- Radar
- Power distribution systems of ICU
- Radio
- Battery cars
- Multi-voltage system
- FPGA design
- Electrical fire monitoring system
