banner_page

TPS3838J25DBVR

1.8V5 Terminals 5-Pin TPS3838J25 Voltage supervisor1 Channels Min 1.6V Max 6V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3838J25DBVR
  • Package: SC-74A, SOT-753
  • Datasheet: -
  • Stock: 152
  • Description: 1.8V5 Terminals 5-Pin TPS3838J25 Voltage supervisor1 Channels Min 1.6V Max 6V (Kg)

Details

Tags

Parameters
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 437mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 1.8V
Base Part Number TPS3838J25
Output Open Drain or Open Collector
Pin Count 5
Operating Supply Voltage 2.5V
Number of Channels 1
Max Supply Voltage 6V
Min Supply Voltage 1.6V
Operating Supply Current 250nA
Nominal Supply Current 15μA
Power Dissipation 437mW
Max Supply Current 15μA
Adjustable Threshold NO
Quiescent Current 220nA
Reset Active Low
Number of Voltages Monitored 1
Reset Timeout 10ms Minimum
Min Reset Threshold Voltage 2.18V
Max Reset Threshold Voltage 2.29V
Undervoltage Threshold 2.25V
Overvoltage Threshold 2.29V
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~85°C TA

TPS3838J25DBVR Overview


This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 1.8V supply voltages. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. Taking into account all of the pins, this power management has a total of 5. 5 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1.6V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 250nA. A similar IC managements number of the manufacturer can always be found by using TPS3838J25, the base power ics number. A maximum supply temperature of 15μA can be used.

TPS3838J25DBVR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current

TPS3838J25DBVR Applications


There are a lot of Texas Instruments TPS3838J25DBVR Voltage Supervisors applications.

  • Cloud computing
  • Refrigeration
  • Dash board
  • Sensitive sensors
  • Smartphones
  • Utility meter
  • DVR
  • Embedded computing
  • DSP
  • Efficient information transmission

Write a review

Note: HTML is not translated!
    Bad           Good