TPS3838K33DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.93V |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS3838K33 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Operating Supply Voltage | 3.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 250nA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 437mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10ms Minimum |
| Min Reset Threshold Voltage | 2.84V |
| Max Reset Threshold Voltage | 2.99V |
| Undervoltage Threshold | 2.93V |
| Overvoltage Threshold | 2.99V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3838K33DBVR Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a SC-74A, SOT-753 package. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 1.8V. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. There are a total of 5 pins on power management. 5 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 1.6V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. A Surface Mount mounting type is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 250nA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use TPS3838K33, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 15μA.
TPS3838K33DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3838K33DBVR Applications
There are a lot of Texas Instruments TPS3838K33DBVR Voltage Supervisors applications.
- Power distribution systems of ICU
- emergency room
- Radar
- Automotive permanent magnet synchronous motors
- Radio
- Functional modules
- DVR
- Urban rail transit weak current power monitoring
- Efficient information transmission
- DC stabilized power supply module
