TPS3838L30DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.64V |
| Max Power Dissipation | 437mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TPS3838L30 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Max Output Current | 5mA |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.6V |
| Operating Supply Current | 250nA |
| Nominal Supply Current | 15μA |
| Power Dissipation | 437mW |
| Max Supply Current | 15μA |
| Adjustable Threshold | NO |
| Quiescent Current | 220nA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 10ms Minimum |
| Min Reset Threshold Voltage | 2.56V |
| Max Reset Threshold Voltage | 2.69V |
| Undervoltage Threshold | 2.64V |
| Overvoltage Threshold | 2.69V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3838L30DBVT Overview
This power management consists of 5 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a SC-74A, SOT-753 package. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts at a voltage of 1.8V. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. In total, IC powers are 5 pins on the board. Power managment ic pin count is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.6V. During this IC power, the maximum supply voltage (Vsup) should not exceed 6V volts. A Surface Mount mounting type is recommended. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During operation, this power management system outputs Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 250nA is the recommended value. As well as this, there are other features to mention such as [0], for example. You can always use TPS3838L30, the base supervisor number, to search for similar PMICs of the manufacturer. A maximum supply temperature of 15μA can be used.
TPS3838L30DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current
TPS3838L30DBVT Applications
There are a lot of Texas Instruments TPS3838L30DBVT Voltage Supervisors applications.
- Electronics installed in the vehicle
- DSP
- Transformer load monitoring equipment
- Rechargeable batteries
- Military electronics
- Embedded computing
- Radio
- Efficient information transmission
- Leakage protection
- Microprocessor system
