banner_page

TPS3839G18DQNR

4 Terminals TPS3839G18 Voltage supervisor1 Channels Min 900mV Max 6.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3839G18DQNR
  • Package: 4-XDFN Exposed Pad
  • Datasheet: -
  • Stock: 560
  • Description: 4 Terminals TPS3839G18 Voltage supervisor1 Channels Min 900mV Max 6.5V (Kg)

Details

Tags

Parameters
Number of Terminations 4
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.65mm
Base Part Number TPS3839G18
Output Push-Pull, Totem Pole
Number of Channels 1
Max Supply Voltage 6.5V
Min Supply Voltage 900mV
Operating Supply Current 150nA
Max Supply Current 500nA
Adjustable Threshold NO
Quiescent Current 150nA
Watchdog Timer No
Reset Active Low
Voltage - Threshold 1.67V
Number of Voltages Monitored 1
Reset Timeout 120ms Minimum
Min Reset Threshold Voltage 1.628V
Max Reset Threshold Voltage 1.695V
Threshold Voltage +1.67V
Height 400μm
Length 1mm
Width 1mm
Thickness 370μm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-XDFN Exposed Pad
Number of Pins 4
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)

TPS3839G18DQNR Overview


It is mounted through 4 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 4-XDFN Exposed Pad functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power management conducts at a voltage of 1. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. 4 pins are on the supervisor. IC management can only work with a supply voltage of 900mV volts. There should be no more than 6.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 150nA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by TPS3839G18. Voltage supervisor can work with a supply temperature of 500nA at the most.

TPS3839G18DQNR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
150nA operating supply current

TPS3839G18DQNR Applications


There are a lot of Texas Instruments TPS3839G18DQNR Voltage Supervisors applications.

  • Medical-specific insulation monitor
  • Detection of phase loss
  • Unattended substation automation
  • Consumer electronics
  • Power communication system
  • Magnetic resonance imaging
  • Leakage protection
  • Analog circuit
  • Satellite navigation
  • WiFi router

Write a review

Note: HTML is not translated!
    Bad           Good