banner_page

TPS3839G33DQNR

4 Terminals TPS3839G33 Voltage supervisor1 Channels Min 600mV Max 6.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3839G33DQNR
  • Package: 4-XDFN Exposed Pad
  • Datasheet: -
  • Stock: 932
  • Description: 4 Terminals TPS3839G33 Voltage supervisor1 Channels Min 600mV Max 6.5V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-XDFN Exposed Pad
Number of Pins 4
Operating Temperature -40°C~85°C TA
Packaging Cut Tape (CT)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature RESET THRESHOLD VOLTAGE IS 2.93V
Subcategory Power Management Circuits
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.65mm
Base Part Number TPS3839G33
Output Push-Pull, Totem Pole
Number of Channels 1
Max Supply Voltage 6.5V
Min Supply Voltage 600mV
Operating Supply Current 150nA
Max Supply Current 500nA
Adjustable Threshold NO
Quiescent Current 150nA
Watchdog Timer No
Reset Active Low
Number of Voltages Monitored 1
Reset Timeout 120ms Minimum
Min Reset Threshold Voltage 3.003V
Max Reset Threshold Voltage 3.126V
Threshold Voltage +3.08V
Undervoltage Threshold 3.08V
Height 400μm
Length 1mm
Width 1mm
Thickness 370μm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS3839G33DQNR Overview


As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. It is packaged with Cut Tape (CT). As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes 4-XDFN Exposed Pad functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Pin count of the power management is 4. A voltage (Vsup) that doesn't fall below 600mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.5V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 150nA volt supply current. Additionally, IC management are a variety of features, for example [0], to name a few. It is always advisable to use TPS3839G33, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 500nA can be used with this power management.

TPS3839G33DQNR Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 600mV
150nA operating supply current

TPS3839G33DQNR Applications


There are a lot of Texas Instruments TPS3839G33DQNR Voltage Supervisors applications.

  • Microprocessor system
  • Military communications
  • Personal computers
  • Battery cars
  • Smart meter
  • Data storage applications
  • Digitally controlled LDO regulators circuit
  • Cloud computing
  • Dash board
  • Automotive permanent magnet synchronous motors

Write a review

Note: HTML is not translated!
    Bad           Good