TPS3839K50DQNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XDFN Exposed Pad |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3839K50 |
| Output | Push-Pull, Totem Pole |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 600mV |
| Operating Supply Current | 150nA |
| Max Supply Current | 500nA |
| Adjustable Threshold | NO |
| Quiescent Current | 150nA |
| Watchdog Timer | No |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 4.271V |
| Max Reset Threshold Voltage | 4.446V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.38V |
| Height | 400μm |
| Length | 1mm |
| Width | 1mm |
| Thickness | 370μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3839K50DQNR Overview
It is mounted through 4 terminals on the power management. In terms of packaging, power management follows the Cut Tape (CT) model. In this IC power you will find 1 functions for you to refer to. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of 4-XDFN Exposed Pad functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. 4 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 600mV. This IC power should be powered by no more than 6.5V volts of supply voltage (Vsup). The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The power management's supply current is 150nA. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3839K50, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 500nA.
TPS3839K50DQNR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 600mV
150nA operating supply current
TPS3839K50DQNR Applications
There are a lot of Texas Instruments TPS3839K50DQNR Voltage Supervisors applications.
- Leakage protection
- Precision measurement
- Leakage current detection
- Transformer load monitoring equipment
- Medical-specific insulation monitor
- Efficient information transmission
- Functional modules
- Personal computers
- Fire equipment power monitoring system
- Battery cars
