TPS3839L30DQNR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XDFN Exposed Pad |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.63V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3839L30 |
| Output | Push-Pull, Totem Pole |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 600mV |
| Operating Supply Current | 150nA |
| Max Supply Current | 500nA |
| Adjustable Threshold | NO |
| Quiescent Current | 150nA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 2.564V |
| Max Reset Threshold Voltage | 2.669V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.63V |
| Height | 400μm |
| Length | 1mm |
| Width | 1mm |
| Thickness | 370μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3839L30DQNR Overview
There are 4 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Cut Tape (CT). There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find 4-XDFN Exposed Pad functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. There are 4 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 600mV, which is the minimum supply voltage that should be applied. There should be no more than 6.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 150nA. Additionally, there are many other features that can be found inside of the power management, such as [0]. You can always use TPS3839L30, the base supervisor number, to search for similar PMICs of the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 500nA.
TPS3839L30DQNR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 600mV
150nA operating supply current
TPS3839L30DQNR Applications
There are a lot of Texas Instruments TPS3839L30DQNR Voltage Supervisors applications.
- Transformer load monitoring equipment
- Refrigeration
- Household appliances
- Satellite navigation
- Precision measurement
- Microcontroller system
- Automotive power systems
- Efficient information transmission
- Medical-specific insulation monitor
- Data storage applications
