TPS386040RGPT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 2.86W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS386040 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 20 |
| Max Output Current | 1mA |
| Power Supplies | 2/6V |
| Number of Channels | 4 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 11μA |
| Nominal Supply Current | 13μA |
| Power Dissipation | 2.86W |
| Adjustable Threshold | YES |
| Quiescent Current | 12μA |
| Accuracy | 0.25 % |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 4 |
| Reset Timeout | Adjustable/Selectable |
| Supply Current-Max (Isup) | 0.022mA |
| Min Reset Threshold Voltage | 396mV |
| Max Reset Threshold Voltage | 404mV |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 930μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS386040RGPT Overview
There are 20 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. There are 4 channels on this power managment ic that can be found in a series. To assist you, this PMIC includes 20-VFQFN Exposed Pad functions. There are a lot of similarities between this IC power and other Multi-Voltage Supervisor products. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 4-voltage supply. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 20 pins on the board. This power management system has 20 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.8V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 6.5V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TJ. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 11μA for the power management. You can always use TPS386040, the base supervisor number, to search for similar PMICs of the manufacturer. The power management must be powered by 2/6V volts to function properly.
TPS386040RGPT Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1.8V
11μA operating supply current
TPS386040RGPT Applications
There are a lot of Texas Instruments TPS386040RGPT Voltage Supervisors applications.
- Data storage applications
- Magnetic resonance imaging
- Utility meter
- Power distribution systems of operating room
- Automotive permanent magnet synchronous motors
- FPGA design
- Detection of phase sequence
- Sensitive sensors
- Refrigeration
- Electric heating appliances
