TPS40000DGQ
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Base Part Number | TPS40000 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 2.5V |
| Output Type | Transistor Driver |
| Max Output Current | 6mA |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 2.25V~5.5V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Soft Start |
| Max Output Voltage | 4V |
| Input Voltage (Min) | 2.25V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 97 % |
| Duty Cycle (Max) | 94% |
| Clock Sync | No |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Weight | 23.501755mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
TPS40000DGQ Overview
The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package and is ideal for most applications. 1 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tube enclosure. The system can process Transistor Driver dc switching's outputs (s). This dc control operates at 2.25V~5.5V and has a 2.25V~5.5V supply voltage. A -40°C~85°C TA dc switcher is not a problem. As it has a Surface Mount value, it can be used for general dc dc regulator. Current Limit, Enable, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. There are a DUAL terminal on the switching converters. A variety of 10 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. A search for "TPS40000" will reveal other relevant dc to dc converter ics. There are only 10 pins on switching converter. dc dc voltage regulators should have a minimum input voltage of 2.25V. Based on the test statistics, DC regulator outputs voltage 2.5V. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 97 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. Switching controller operates at a frequency of 300kHz. DC switching uses 1.5mA when it is dormant. There will be 6mA output current greater than 6mA from the dc switcher. At its maximum, the switching converter can output 4V volts.
TPS40000DGQ Features
Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %
Frequency: 300kHz
TPS40000DGQ Applications
There are a lot of Texas Instruments TPS40000DGQ DC to DC converter applications.
- Access control systems
- Adjustable voltage or current linear circuits
- Refrigerators of central air conditioners
- Injection molding machinery
- Photovoltaic power
- Combined machine tools
- Program control systems
- Printing equipment
- Communication system
- Shearing machines
