TPS40001DGQR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40001 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 700mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.25V~5.5V |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 2.25V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 350kHz |
| Max Duty Cycle | 97 % |
| Duty Cycle (Max) | 94% |
| Clock Sync | No |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40001DGQR Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. dc motor controller is suitable for 1 output generation. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. 2.25V~5.5V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. A switching controller such as this can switch at a value of 300kHz . Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 10 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. You can find other relevant dc to dc converter ics by searching "TPS40001". Total pins of switching converter are 10. In particular, switching converter is a type of Switching Regulator or Controllers. 2.25V should be the minimum input voltage for the dc dc voltage regulator. Statistically, DC regulator outputs 700mV volts. The dc to dc regulator can only accept 5.5V input voltage. voltage regulator dc to dcs with a 97 % duty cycle are designed to be reliable when powered on and powered off. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. DC regulator350kHz has the maximum frequency. This voltage controller requires a supply voltage of 5V.
TPS40001DGQR Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %
TPS40001DGQR Applications
There are a lot of Texas Instruments TPS40001DGQR DC to DC converter applications.
- Game consoles
- Electric heating, lighting
- Digital video recorders
- Refrigerators of central air conditioners
- Overvoltage protection circuits in TV sets
- Linear guide
- Ball screw pair
- Photovoltaic power
- Various precision measuring instruments
- Bending machines
