TPS40001DGQRG4
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40001 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 700mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.25V~5.5V |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 2.25V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 350kHz |
| Max Duty Cycle | 97 % |
| Duty Cycle (Max) | 94% |
| Clock Sync | No |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40001DGQRG4 Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller can be used for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 2.25V~5.5V. A -40°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 300kHz . The Surface Mount makes it ideal for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Soft Start is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . There are many different types of terminations for 10. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. Other relevant dc to dc converter ics will be returned if you search "TPS40001". There are a total of 10 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 2.25V. As determined by the test statistics, the output voltage of DC regulator is 700mV. A maximum voltage of 5.5V is accepted by the dc to dc regulator as an input voltage. It is set to 97 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. DC regulators have a maximum frequency of 350kHz. Switching controller is necessary to provide a voltage of 5V.
TPS40001DGQRG4 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %
TPS40001DGQRG4 Applications
There are a lot of Texas Instruments TPS40001DGQRG4 DC to DC converter applications.
- Electrical distribution systems
- Geothermal power
- Sink circuits
- Household control circuits
- Emergency lighting monitoring equipment
- Planers
- Solar power plants
- Power supplies of electronic gadgets
- Printing equipment
- Direct power supply system
