TPS40002DGQ

10 Terminals 2.25V~5.5V 10-Pin TPS40002 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40002DGQ
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 786
Description: 10 Terminals 2.25V~5.5V 10-Pin TPS40002 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver (Kg)

Details

Tags

Parameters
Max Frequency	700kHz
Max Duty Cycle	97 %
Duty Cycle (Max)	93%
Clock Sync	No
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Lifecycle Status	NRND (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	TPS40002
Function	Step-Down
Number of Outputs	1
Output Voltage	4V
Output Type	Transistor Driver
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V
Quiescent Current	1.5mA
Control Features	Current Limit, Enable, Soft Start
Input Voltage (Min)	2.25V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	600kHz
Input Voltage (Max)	5.5V
Control Technique	PULSE WIDTH MODULATION
Rise Time	35ns
Synchronous Rectifier	Yes
Fall Time (Typ)	25 ns
Switcher Configuration	PUSH-PULL

TPS40002DGQ Overview

Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). 2.25V~5.5V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. It can switch at 600kHz. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 10 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The DC switcher's nominal voltage is 5V. In addition to "TPS40002", there are other relevant dc to dc converter ics you can find. There are only 10 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 2.25V. As determined by the test statistics, the output voltage of DC regulator is 4V. It should be fully noted that the dc to dc regulator only accepts 5.5V input voltage at most. If you are starting a new project, you should note the dc dc regulator's typical output current is 15A. The maximum duty cycle of this voltage regulator dc to dc is set to 97 % to ensure reliability during power-up and power-down. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The max frequency of the pmic can reach 700kHz. A dc switching in a dormant state uses 1.5mA. The supply voltage should be 5V.