TPS40002DGQG4

10 Terminals 2.25V~5.5V 10-Pin TPS40002 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40002DGQG4
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: -
Stock: 931
Description: 10 Terminals 2.25V~5.5V 10-Pin TPS40002 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Lead Free	Lead Free
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Frequency	600kHz
Base Part Number	TPS40002
Function	Step-Down
Number of Outputs	1
Output Voltage	700mV
Output Type	Transistor Driver
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V
Quiescent Current	1.5mA
Control Features	Current Limit, Enable, Soft Start
Max Output Voltage	4V
Topology	Buck
Min Input Voltage	2.25V
Control Mode	VOLTAGE-MODE
Max Input Voltage	5.5V
Control Technique	PULSE WIDTH MODULATION
Rise Time	35ns
Synchronous Rectifier	Yes
Fall Time (Typ)	25 ns
Nominal Input Voltage	5V
Min Output Voltage	700mV
Switcher Configuration	PUSH-PULL
Max Duty Cycle	97 %
Duty Cycle (Max)	93%
Clock Sync	No
Length	3mm
Width	3mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

TPS40002DGQG4 Overview

It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 1 outputs. Packaged in solid enclosures, this pmic has a Tube rating. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 2.25V~5.5V. A -40°C~85°C TA dc switcher is not a problem. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 10 terminations are available in dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 5V. TPS40002 can be used to locate other relevant dc to dc converter ics. Pins number 10 of switching converter in total. Specifically, switching converter falls under the Switching Regulator or Controllers category. A 700mV voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 15A, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 97 %. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Switching controller operates at 600kHz Hz. As long as the dc switching is in a dormant state, it utilizes 1.5mA. It is possible to set the input voltage to 5V for nominal working status. The maximum input voltage of this dc switcher is 5.5V, so users must limit the voltage accordingly. The supply voltage must be 2.25V. The switching converter can output 4V volts at its utmost, according to the datasheet. Lowest voltage output of the voltage controller must be greater than 700mV.