TPS40003DGQ

10 Terminals 2.25V~5.5V 10-Pin TPS40003 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40003DGQ
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 471
Description: 10 Terminals 2.25V~5.5V 10-Pin TPS40003 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver (Kg)

Details

Tags

Parameters
Lifecycle Status	NRND (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	TPS40003
Function	Step-Down
Number of Outputs	1
Output Voltage	700mV
Output Type	Transistor Driver
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V
Control Features	Current Limit, Enable, Soft Start
Input Voltage (Min)	2.25V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	600kHz
Input Voltage (Max)	5.5V
Control Technique	PULSE WIDTH MODULATION
Rise Time	35ns
Synchronous Rectifier	Yes
Fall Time (Typ)	25 ns
Switcher Configuration	PUSH-PULL
Max Frequency	700kHz
Max Duty Cycle	97 %
Duty Cycle (Max)	93%
Clock Sync	No
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS40003DGQ Overview

With a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC is packaged in a solid enclosure of Tube. There are Transistor Driver dc switching's output (s) that it can handle. This dc control has a supply voltage and operating voltage of 2.25V~5.5V. Suitable for a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 600kHz. dc dc regulator can be generalized using Surface Mount. Current Limit, Enable, Soft Start provides dcdc regulator efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. The 10 terminations can be used for a wide range of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "TPS40003". Switching converter has a total of 10 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator must be 2.25V. Based on the test statistics, DC regulator outputs voltage 700mV. It should be noted that the dc to dc regulator only accepts 5.5V voltage as input voltage. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. The duty cycle of the voltage regulator dc to dc can be set to 97 % on power-up or power-down to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. The max frequency of the pmic can reach 700kHz. The supply voltage must be 5V.