TPS40005DGQ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40005 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 700mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.25V~5.5V |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 2.25V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 700kHz |
| Max Duty Cycle | 97 % |
| Duty Cycle (Max) | 93% |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40005DGQ Overview
It comes in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. Tube is the solid enclosure in which PMIC is packaged. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 2.25V~5.5V. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller can be switched at 600kHz. A generalization of dc dc regulator can be made using Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. There are many different types of terminations for 10. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input of 5V. Searching "TPS40005" will return other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. It is recommended to use 2.25V as the minimum input voltage of dc dc voltage regulator. Based on the test statistics, DC regulator outputs voltage 700mV. At most, the dc to dc regulator accepts 5.5V input voltage. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 97 %. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulator's maximum frequency is 700kHz.
TPS40005DGQ Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %
TPS40005DGQ Applications
There are a lot of Texas Instruments TPS40005DGQ DC to DC converter applications.
- Flexible manufacturing cells
- Die casting equipment
- Various precision measuring detectors
- Wide-range voltage regulation circuits
- Motor controller circuits
- Flaw detection equipment
- Special machining machine tools
- Ball screw pair
- SMT equipment
- Direct power supply system
