TPS40005DGQG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40005 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 700mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.25V~5.5V |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 2.25V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 35ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 25 ns |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 700kHz |
| Max Duty Cycle | 97 % |
| Duty Cycle (Max) | 93% |
| Clock Sync | No |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS40005DGQG4 Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. It is sufficient to generate 1 outputs with this dc motor controller. A solid enclosure of Tube surrounds pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 2.25V~5.5V. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 600kHz. dc dc regulators can be carried out with Surface Mount. Current Limit, Enable, Soft Start is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a terminal (s) on the switching converters that are designed at DUAL. There are many different types of terminations for 10. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. In addition to "TPS40005", there are other relevant dc to dc converter ics you can find. Pins number 10 of switching converter in total. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 2.25V. According to the test statistics, DC regulator outputs 700mV voltage. Considering the dc to dc regulator can only accept 5.5V input voltage, it is important to take note of this. It is set to 97 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. This Surface Mount makes DC switcher suitable for most prototypes and applications. This dc regulatorhas a max frequency of 700kHz.
TPS40005DGQG4 Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 97 %
TPS40005DGQG4 Applications
There are a lot of Texas Instruments TPS40005DGQG4 DC to DC converter applications.
- Current source circuits
- Computed tomography (CT)
- Communication system
- Household control circuits
- USB circuits
- Solar power plants
- Product burn-in
- Magnetohydrodynamic power
- Linear guide
- Precision electronic equipment
