TPS40007DGQ
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Base Part Number | TPS40007 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 6mA |
| Voltage - Supply (Vcc/Vdd) | 2.25V~5.5V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Soft Start |
| Max Output Voltage | 4V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 94% |
| Clock Sync | No |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Weight | 23.501755mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
TPS40007DGQ Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller suits most application needs. 1 outputs can be generated with the dc motor controller. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. 2.25V~5.5V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Soft Start is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 10. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. A DC switcher's nominal voltage of 5V is input. Other relevant dc to dc converter ics can be found by searching "TPS40007". The switching converter has a total of 10 pins. Test statistics indicate DC regulator outputs 4V voltage. If you start a project, note down the dc dc regulator's usual output current of 6mA. The Surface Mount makes DC switcher suitable for most applications and prototypes. 300kHz is the frequency of the switching controller. A dc switching in a dormant state uses 1.5mA. Since the dc switcher's maximum input voltage is 5.5V, the voltage must be regulated accordingly. There will be 15A output current greater than 15A from the dc switcher. At its maximum output, the switching converter can provide 4V volts.
TPS40007DGQ Features
Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Frequency: 300kHz
TPS40007DGQ Applications
There are a lot of Texas Instruments TPS40007DGQ DC to DC converter applications.
- Cutting machine tools
- Sensitive electronic devices
- Smoke exhaust equipment
- Servo drive system
- Thermal power
- PSRR circuits
- Energy management systems
- Flexible manufacturing cells
- Hydro power
- Emergency lighting monitoring equipment
