TPS40007DGQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Weight | 23.501755mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40007 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 2.25V~5.5V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Soft Start |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 350kHz |
| Duty Cycle (Max) | 94% |
| Clock Sync | No |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40007DGQR Overview
As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. For outputs of 1, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) can be handled by it. The supply and operating voltage of the dc control are 2.25V~5.5V. Suitable for work in a -40°C~85°C TA dc switcher. This switching controller can switch at 300kHz. dc dc regulator can be generalized using Surface Mount. For efficient switching control, the dcdc regulator features Current Limit, Enable, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 10 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 5V. Other relevant dc to dc converter ics can be found by searching "TPS40007". 10 pins are present on switching converter. According to the test statistics, DC regulator outputs 4V voltage. normally, the dc dc regulator's output current is 15A, which you should keep in mind when starting a project. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. It is estimated that this dc regulatorhas a maximum frequency of 350kHz. A dc switching in a dormant state uses 1.5mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 5.5V due to the dc switcher's maximum input voltage. An output current greater than 15A cannot be provided by the dc switcher.
TPS40007DGQR Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
TPS40007DGQR Applications
There are a lot of Texas Instruments TPS40007DGQR DC to DC converter applications.
- Balance equipment
- Injection molding machinery
- Series voltage regulation circuits
- Computer monitoring equipment of building
- Arc suppression circuits
- Mobile phones
- Servo drive system
- Fire elevators
- Elevator lighting
- Industrial robots
