TPS40007DGQRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40007 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 2.25V~5.5V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Soft Start |
| Input Voltage (Min) | 2.25V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 350kHz |
| Max Duty Cycle | 94 % |
| Clock Sync | No |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40007DGQRG4 Overview
With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller fits the needs of most applications. 1 outputs are supported by the dc motor controller. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. 2.25V~5.5V is the operating voltage and supply voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. This switching controller can switch at 300kHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 10 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. TPS40007 can be used to locate other relevant dc to dc converter ics. Pins number 10 of switching converter in total. Input voltage of dc dc voltage regulator should be 2.25V. Test statistics indicate DC regulator outputs 4V voltage. You should note down the dc dc regulator's usual output current of 15A when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 94 % to ensure reliability during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 350kHz for this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 5.5V to the voltage regulator dc to dc. In dormant mode, 1.5mA is used.
TPS40007DGQRG4 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 94 %
TPS40007DGQRG4 Applications
There are a lot of Texas Instruments TPS40007DGQRG4 DC to DC converter applications.
- Analog precision reference circuits
- Electric heating, lighting
- Die casting equipment
- Sink circuits
- Drilling machines
- Digital precision reference circuits
- Flaw detection equipment
- Balance equipment
- Constant current circuits
- Hydrogen power
