TPS40020PWP
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 1MHz |
| Base Part Number | TPS40020 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 2.25V~5.5V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 2.25V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 95% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40020PWP Overview
It comes in the 16-PowerTSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 2.25V~5.5V. Suitable for a -40°C~85°C TA dc switcher. It can switch at 100kHz~1MHz. dc dc regulators can be carried out with Surface Mount. Current Limit, Enable, Frequency Control, Power Good, Soft Start provides dcdc regulator efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 5V nominal DC switcher's voltage input. A search for "TPS40020" will reveal other relevant dc to dc converter ics. There are only 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 2.25V. According to the test statistics, DC regulator outputs 4V voltage. You should note down the dc dc regulator's usual output current of 25A when you start a project. DC switcher's Surface Mount qualifies it for most applications and prototypes. 1MHz is the frequency of the switching controller. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 5.5V. DC switchings that are dormant use 1.5mA. This voltage controller requires a supply voltage of 5V.
TPS40020PWP Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Frequency: 1MHz
TPS40020PWP Applications
There are a lot of Texas Instruments TPS40020PWP DC to DC converter applications.
- Game consoles
- Driver circuits
- Injection molding machinery
- Emergency lighting monitoring equipment
- Pipe bending machines
- Surface processing equipment
- Window air conditioners
- Electrical power transmission
- Remotely powered electric motors
- Linear guide
