TPS40020PWPG4

16 Terminals 2.25V~5.5V 16-Pin TPS40020 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40020PWPG4
Package: 16-PowerTSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 954
Description: 16 Terminals 2.25V~5.5V 16-Pin TPS40020 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 100kHz~1MHz Transistor Driver (Kg)

Inquiry Now

Details

Tags

Parameters
Duty Cycle (Max)	95%
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Lifecycle Status	NRND (Last Updated: 1 week ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-PowerTSSOP (0.173, 4.40mm Width)
Number of Pins	16
Weight	62.709145mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	16
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Base Part Number	TPS40020
Function	Step-Down
Number of Outputs	1
Output Voltage	4V
Output Type	Transistor Driver
Operating Supply Voltage	5.5V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	2.25V~5.5V
Quiescent Current	1.5mA
Control Features	Current Limit, Enable, Frequency Control, Power Good, Soft Start
Input Voltage (Min)	2.25V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	100kHz~1MHz
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Switcher Configuration	PUSH-PULL
Max Frequency	1.1MHz

TPS40020PWPG4 Overview

As a result of 16-PowerTSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 2.25V~5.5V volts and has 2.25V~5.5V supply voltage. Suitable for work in a -40°C~85°C TA dc switcher. The switching controller is capable of switching at the 100kHz~1MHz position. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Power Good, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. A variety of 16 terminations are available in dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. Searching "TPS40020" will return other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 2.25V is the minimum required for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 4V voltage. You should note that the dc dc regulator's usual output current is 15A. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. This dc regulatorhas a max frequency of 1.1MHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 5.5V. During dormancy, the dc switching uses 1.5mA. There is a requirement for a 5V supply voltage.